| Author |
Message |
|
brea79
|
Post subject: Cruel Drilling advice.  Posted: Tue Aug 17, 2010 4:47 pm |
|
Joined: Mon Aug 16, 2010 10:23 am
Posts: 2
|
|
Hello Motivnation.
I am new to the boards here. I never have had much success with asymetric bowling balls for some reason. So anyways I drilled up a Cruel with a (60/4/35) turned out Pin up for me. It just lacked continuation for me. So I have another one to try something else. I did some research on the specs and see it is similar to the Up-Rising and the Rising SE (which I liked with the pin-down layout). So sorry to babble but I would like to know if applying that drilling to a Cruel might be a similar look??
Thanks guys
Im left handed
360-375 rev
35-50 rotation
10 tilt
18mph at foul line
|
|
| Top |
|
 |
|
JustinWi
|
Post subject: Re: Cruel Drilling advice. Posted: Wed Aug 18, 2010 7:45 pm |
|
Joined: Thu Aug 27, 2009 10:43 pm
Posts: 1688
Location: Rochester NY
|
|
That is a strong drill on the Cruel, have you tried some shine?
|
|
| Top |
|
|
|
brea79
|
Post subject: Re: Cruel Drilling advice. Posted: Wed Aug 18, 2010 8:01 pm |
|
Joined: Mon Aug 16, 2010 10:23 am
Posts: 2
|
|
I have not yet on the drilled Cruel. But I could try it.
|
|
| Top |
|
|
