motivbowling.com
http://www.motivbowling.com/forum/

CHANGING BUFFER LAYOUTS TO DEGREE LAYOUTS
http://www.motivbowling.com/forum/viewtopic.php?f=8&t=1668
Page 1 of 1

Author:  hudwood [ Sun Sep 26, 2010 2:26 pm ]
Post subject:  CHANGING BUFFER LAYOUTS TO DEGREE LAYOUTS

HELLO THERE MOTIV WORLD

thought i would show some buffer layouts that are strong and change them to degree layouts ....

4x4 with 1.5 pin buffer...35x4x25 strong hook
4x4 with 2.5 pin buffer...35x4x40 strong continuation
4x4 with 3.5 pin buffer...45x3.5x50 predictability on heavy oil
2.5x5.5 with 1.25 pin buffer...50x2.5x40 wet dry lanes
2.5x5.5 with 2.5 pin buffer....50x2.5x55 less flare stability
6x5 with 2.75 pin buffer.....65x5.75x45 (crankers)
5x3 with 2.0 pin buffer.....30x5x30 high entry angle....
5x3 with 3.0 pin buffer.....30x5x55 strong good continuation

jim huddleston
motiv staff member

Author:  strimmed [ Tue Sep 28, 2010 1:52 am ]
Post subject:  Re: CHANGING BUFFER LAYOUTS TO DEGREE LAYOUTS

Thanks jim, that is a great example with a good description. I recently have had great success thru justin suggesting layouts for me by just giving him a pretty rough sketch on how i roll the ball and for my league conditions.
I dont plan on getting help elsewhere as he has been spot on, but just for giggles, how would u suggest i layout a cruel, for lets say, a medium-low volume 2nd shift house shot. My estimates are below:
14-15 mph
290-300 rev rate
Stroker/tweener
Like to stand at 22 hit 2nd arrow to about 7 at the breakpoint. Breakpoint usually looping around the lasr range finder closest to the right hand gutter.

PS, would u say with these specs that im slightly speed or rev dominant? I think i always told justin that im neither, and that they both match up well, but i dont know how accurate that statement is.

Thanks again Jim

Author:  hudwood [ Wed Sep 29, 2010 6:08 pm ]
Post subject:  Re: CHANGING BUFFER LAYOUTS TO DEGREE LAYOUTS

Thank you for your input but as you mentioned in your post Justin's layout is spot on. So if it ain't broke, why fix it. Good luck-Good bowling.

See you at the World Series of Bowling in Vegas.

Jim Huddleston
Motiv Staff Member
PBA Member

Author:  strimmed [ Fri Oct 01, 2010 3:57 am ]
Post subject:  Re: CHANGING BUFFER LAYOUTS TO DEGREE LAYOUTS

Your absolutely right. I am a firm believer in not changing what works, nor did i have any intentions to, i was just merely wondering what layout u wouldve suggested based on that vague info i provided u, to see how close it resembles the layouts that justin recommended. The ball in question is already drilled, and like i said i dont plan on changing it. I just was curious to see if the angles u would've came up with would be similar to the layout we went with. Basically, just for fun, as im trying to get more adapt to ball layouts and such

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/