| Author |
Message |
|
ado
|
Post subject: Need a Layout for Raptor P7  Posted: Thu Mar 15, 2012 6:16 am |
|
Joined: Thu Mar 15, 2012 6:04 am
Posts: 4
|
|
Hi Justin, could you please let me know the best layout for a Raptor P7 15lb,
Bowler Information:
PAP = 5 over - 1/2 up
Ball Speed = 16mph
Rev Rate = 270
Tilt = 12 *
Rotation = 50 *
Ball Information:
Make and Model of ball(s) = Raptor p7
Weight = 15lb 2oz
Desired reaction shape = big back end movement with continuation through the pins. I'm after a very aggressive ball in Heavy oil
Environment information:
This ball will fit in the top of my range for heavy hook. To be used when the lane conditions are long heavy oil.
Lane surface, Heavy Oil
Conditioner, Kegel
_________________
PAP = 5 over - 1/2 up
Ball Speed = 16mph
Rev Rate = 270
Tilt = 12 *
Rotation = 50 *
Sigma Tour 2000 (Siaair pad)
QZ 2000 Polished
Primal Scream - OOB
High game 297 (Sigma)
High series 741 with triplicate 247 (Sigma)
|
|
| Top |
|
 |
|
kskidmore
|
Post subject: Re: Need a Layout for Raptor P7 Posted: Thu Apr 12, 2012 7:31 pm |
|
Joined: Thu Apr 12, 2012 7:26 pm
Posts: 30
|
|
With my Raptor, I went with 60 x 5" x 35 and I get that "strong/continuous" reaction and drive through the pins. I do believe I am going to drill another to be earlier for reading patterns and less reactive on break. For your specs, I'd recommend the "Strong layout" on the drill sheet and go with something like 40 x 4 x 40, or even add 5 degrees to each and make it 45 x 4 x 45. Good layout with maximum potential drill wise.
_________________
Kenny "The Kid" Skids
The Bowler's Shop - Anderson, IN
"Now That's Money!!!"
|
|
| Top |
|
|
|
JustinWi
|
Post subject: Re: Need a Layout for Raptor P7 Posted: Fri Apr 13, 2012 8:50 am |
|
Joined: Thu Aug 27, 2009 10:43 pm
Posts: 1688
Location: Rochester NY
|
|
50x40@3.5" P3 hole. For lots of oil you may want to hit it with 1000 or even 500 Abralon.
|
|
| Top |
|
|
