| Author |
Message |
|
KINGCOBRA
|
Post subject: TZ3  Posted: Fri Dec 03, 2010 8:22 am |
|
Joined: Sun Nov 07, 2010 8:40 am
Posts: 76
|
|
I need a layout for my new TZ3! I want a strong backend! I bowl on dry lanes 80% of the time! A typical house pattern on sundays! Any ideas would be appreciated!
|
|
| Top |
|
 |
|
millerlite
|
Post subject: Re: TZ3 Posted: Tue Dec 07, 2010 1:08 pm |
|
Joined: Fri Dec 11, 2009 12:00 pm
Posts: 13
Location: levis, qc. canada
|
|
Knowing how strong this core is, you should look at a drilling angle of at least 60-80 and a VAL angle of 25-30 with a pin of 5 to 5.5, depending on your speed also. This will give you a good kick off the back. The megathrust core gives just that compared to the Quadfire. I drilled mine for control and to read the lane earlier 40*4.5*55. Give us some feedback after you drilled it!!
Yanick
|
|
| Top |
|
|
|
KINGCOBRA
|
Post subject: Re: TZ3 Posted: Tue Dec 07, 2010 10:33 pm |
|
Joined: Sun Nov 07, 2010 8:40 am
Posts: 76
|
|
I'll probably will go 60 30 5. My speed is 17-18mph!
|
|
| Top |
|
|
