MOTIV

Username: Log me on automatically each visit
Password:
It is currently Thu Jul 31, 2014 1:22 am


Post a new topicPost a reply Page 1 of 1   [ 5 posts ]
Author Message
 Post subject: Help me layout a QZ1 purple
PostPosted: Mon Dec 21, 2009 1:26 pm 

Joined: Wed Nov 18, 2009 10:01 am
Posts: 70
This will probably be my next ball.

Here are my specs:
PAP - 4 7/8" left; 3/4" up
Rev - 380-400
Speed - 19-19.5 mph

What specs should I look for in the ball? I want something to make it through the feathers and make a strong move on the back end. I do not want to have swing out to the dry to make it hook. I leave too many 7's this way. Something that charges hard off the 2nd range finder would suit me best.

Thanks in advance!

_________________
Best Game - 300 (9)
Best Series - 840 (3 800's)

In the bag:
Raging Bull 45x4x60 P2 hole
Solaris Blackout 60x4.5x35 P2 hole
SR2 55x4.75x45 no hole yet
Victory Road Solid 50x4.5x40 with a P2
715T 55x3x35 with a P3 hole
T-zone


Top
 Profile  
 
 Post subject: Re: Help me layout a QZ1 purple
PostPosted: Mon Dec 21, 2009 2:28 pm 

Joined: Mon Jun 22, 2009 4:28 pm
Posts: 26
The one thing I have noticed is the QZ1's is they roll better with a little surface. I would recommend putting the surface at 2000 Scuff Polish, then clean it and hit it with a 500 abralon pad. After that I would do a longer pin from your PAP to reduce track flare and try to keep it above the fingers. That would still leave you enough backend to hopefully chop that 7 pin out but still utilize the ball with the surface, but that is for a house shot type of condition.


Top
 Profile  
 
 Post subject: Re: Help me layout a QZ1 purple
PostPosted: Mon Dec 21, 2009 2:32 pm 

Joined: Wed Nov 18, 2009 10:01 am
Posts: 70
That sounds like a good approach. Most of my equipment has the pin 1/2" to 2" above my ring.

_________________
Best Game - 300 (9)
Best Series - 840 (3 800's)

In the bag:
Raging Bull 45x4x60 P2 hole
Solaris Blackout 60x4.5x35 P2 hole
SR2 55x4.75x45 no hole yet
Victory Road Solid 50x4.5x40 with a P2
715T 55x3x35 with a P3 hole
T-zone


Top
 Profile  
 
 Post subject: Re: Help me layout a QZ1 purple
PostPosted: Mon Dec 21, 2009 3:59 pm 

Joined: Thu Aug 27, 2009 10:43 pm
Posts: 1698
Location: Rochester NY
45x40@4" P2 or P3 hole.

1000 Abralon to start.


Top
 Profile  
 
 Post subject: Re: Help me layout a QZ1 purple
PostPosted: Tue Dec 29, 2009 1:25 am 

Joined: Mon Jun 22, 2009 11:08 am
Posts: 14
if you really want to tighten the flare on the ball put a flare decreasing hole on the left side of your v a l ive seen flare on other balls go from four inches down to two inches by doing this


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 1   [ 5 posts ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

MOTIV