| Author |
Message |
|
badbeard
|
Post subject: high vertical pap  Posted: Tue Sep 06, 2011 9:49 pm |
|
Joined: Sun Jul 10, 2011 5:12 pm
Posts: 112
|
|
my vertical pap is 1/1/2 up and all the pins end up 1 inch up from my fingers because I also have a short span of 3 6/16 cut to cut.
question; is with my pins so high on the ball does it make it hard for me to get some balls to rev up. or does it make no difference.
_________________
speed dom 18 at pin deck
rev 180-210
tilt 13
ro 40-50
PAP 4 1/2 X 1 1/2 Up
sweet spot
45/3.25/30 asym
50/3.25/25 sym
Rap Attack 60/4/40
Sig tour 45/3.25/25 obf
Primal t4 55/ 4.75/45
Rap 55/3/25 + p3
Primal Im 45x 3.375 x 40 wi hole
Thrash 50x4.25x35
Last edited by badbeard on Thu Sep 08, 2011 12:27 am, edited 1 time in total.
|
|
| Top |
|
 |
|
Sikfish
|
Post subject: Re: high vertical pap Posted: Wed Sep 07, 2011 1:34 pm |
|
Joined: Wed Aug 11, 2010 10:04 am
Posts: 102
Location: Coldwater, Michigan
|
|
ok...so what is your question here?
Badbeard....what is keeping you pins so high is your VAL angle is very little, which equates to a very fast revving, transitioning very quick ball motion....which is probably why they seem to labor on the backends. My thought would be to do something like a 60 x 4" x 50 and see if you see any difference in ball motion, tweak the surface alittle to tune....let us know how it goes...
|
|
| Top |
|
|
