MOTIV

Username: Log me on automatically each visit
Password:
It is currently Sat Aug 30, 2014 8:13 pm


Post a new topicPost a reply Page 1 of 1   [ 9 posts ]
Author Message
 Post subject: Recon Rx1 drilling 20x6x15 for cheetah
PostPosted: Mon Sep 06, 2010 4:20 pm 

Joined: Fri Sep 03, 2010 8:42 pm
Posts: 2
here is a great drilling for the shorter pba patterns...and a video as well


Jim Huddleston
Motiv Staff Member
Powerhouse Certified


http://www.youtube.com/watch?v=t_QfM6CXyLw


Top
 Profile  
 
 Post subject: Re: Recon Rx1 drilling 20x6x15 for cheetah
PostPosted: Thu Oct 28, 2010 1:10 pm 

Joined: Fri Oct 22, 2010 7:09 pm
Posts: 27
I'm kind of interested in the layout,does this layout make the core pull the ball down the lane or simply just kills the reaction of the core?


Top
 Profile  
 
 Post subject: Re: Recon Rx1 drilling 20x6x15 for cheetah
PostPosted: Thu Oct 28, 2010 8:34 pm 

Joined: Thu Jul 02, 2009 4:01 pm
Posts: 526
Not sure how this layout will work. Sounds like it will go pretty long but everything will depend on how hard you throw it & what surface you use it on. Tried to watch the vid but it said it was removed by the user. Also, confused on how RyanGuff can post using Hud's signature line.

_________________
Bob "Mick" Michalojko
Colonial Lanes Pro Shop
PBA Member
Motiv Staff Member
Turbo Xtreme Dealear Member


Top
 Profile  
 
 Post subject: Re: Recon Rx1 drilling 20x6x15 for cheetah
PostPosted: Thu Oct 28, 2010 8:54 pm 

Joined: Fri Oct 22, 2010 7:09 pm
Posts: 27
here... http://www.youtube.com/watch?v=fVa8sO0nw_Y


Top
 Profile  
 
 Post subject: Re: Recon Rx1 drilling 20x6x15 for cheetah
PostPosted: Fri Oct 29, 2010 4:53 am 

Joined: Tue Aug 31, 2010 6:26 pm
Posts: 77
old post.... Ryan messed it up.... Im here in vegas i used the ball on the cheeta....it did work pretty good tell it dry up... Good on fresh oil ...not good on the burn. Jim hud


Top
 Profile  
 
 Post subject: Re: Recon Rx1 drilling 20x6x15 for cheetah
PostPosted: Fri Oct 29, 2010 12:35 pm 

Joined: Thu Aug 27, 2009 10:43 pm
Posts: 1698
Location: Rochester NY
Low VAL angles combined with long pins creates forward roll after friction is encountered. A layout like this is a good way to tame and control the backend.

Be advised that using a 15* VAL angle does invite trouble in instances where people track high, by pulling the bowtie up enough to where the ball will flare over the thumb.


Top
 Profile  
 
 Post subject: Re: Recon Rx1 drilling 20x6x15 for cheetah
PostPosted: Mon Nov 01, 2010 11:03 pm 

Joined: Fri Oct 22, 2010 7:09 pm
Posts: 27
I've been considering the recon since I really like the QZ2 with the 70x2.5x40 p3 x hole. I want to stay in the track after it gets to dry for my QZ2,maybe a recon with a 75x2x25 ? I DON'T need a ball to open up the lane but one I can stay up the righty road.
thoughts???

speed 16-17
revs 400
tilt 10*
a/r 30-70


Top
 Profile  
 
 Post subject: Re: Recon Rx1 drilling 20x6x15 for cheetah
PostPosted: Tue Nov 02, 2010 9:34 am 

Joined: Thu Aug 27, 2009 10:43 pm
Posts: 1698
Location: Rochester NY
Steve H. wrote:
I've been considering the recon since I really like the QZ2 with the 70x2.5x40 p3 x hole. I want to stay in the track after it gets to dry for my QZ2,maybe a recon with a 75x2x25 ? I DON'T need a ball to open up the lane but one I can stay up the righty road.
thoughts???

speed 16-17
revs 400
tilt 10*
a/r 30-70


You could shell down with an RX1 laid out the same, this will give you a similar motion but less overall by a few boards. Otherwise get into a higher angle sum length and smooth layout, like the 70x60@5.25".


Top
 Profile  
 
 Post subject: Re: Recon Rx1 drilling 20x6x15 for cheetah
PostPosted: Tue Nov 02, 2010 11:03 pm 

Joined: Fri Oct 22, 2010 7:09 pm
Posts: 27
useing my QZ2 more and more I have to agree with you Justin.I'm very impressed with this ball and have to say I'm now hooked on Motiv.I'm also proud that they are made in my home state.
Steve :D


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 1   [ 9 posts ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

MOTIV